ATX224R

เครื่องชั่งวิเคราะห์ทศนิยม 4 ตำแหน่ง Analytical Balance

รายละเอียดเครื่องชั่งวิเคราะห์ รุ่น ATX224R

  1. เครื่องชั่งไฟฟ้า สำหรับวิเคราะห์แบบชั่งด้านบน  (Analytical Balances) เทคโนโลยี UniBloc
  2. ตัวเครื่องทำจากพลาสติก ABS ซึ่งมีความแข็งแรง ทนต่อสารเคมี
  3. ชั่งน้ำหนักได้สูงสุด 220 กรัม
  4. ความละเอียด 0.1 มิลลิกรัม  หรือ 0.0001 กรัม
  5. ค่าเบี่ยงเบนของผลการชั่งน้ำหนักท (Linearity) ± 0.2 mg
  6. ความผิดพลาดจากการชั่งซ้ำ (Repeatability) ≤ 0.1 mg
  7. ค่าความสัมประสิทธิ์ของการเปลี่ยนแปลงอุณหภูมิ (Temperature Coefficient Sensitivity) ± 2 ppm/◦C ในช่วง 10◦C-30◦C
  8. ค่า Stabilization Time ประมาณ 3.0 วินาที
  9. จานชั่งมีขนาดเส้นผ่านศูนย์กลาง 91 มิลลิเมตร
  10. มีระบบการปรับน้ำหนักโดยใช้ลูกตุ้มน้ำหนักภายในเครื่อง (Internal Calibration)
  11. สามารถเปลี่ยนหน่วยการชั่ง ได้ เช่น g, mg, ct, oz ฯลฯ เป็นต้น
  12. มีฟังค์ชั่น Easy Setting ที่สามารถปรับค่าอัตราการตอบสนองการอ่านค่า และค่า Stability ได้
  13. มีฟังค์ชั่น Piece Counting สำหรับการชั่งแบบนับชิ้นตัวอย่าง และฟังค์ชั่นการแปลงหน่วยเป็นเปอร์เซ็นต์ หรือกะรัตได้
  14. สามารถวัดค่าความถ่วงจำเพาะหรือความหนาแน่นของตัวอย่างได้ โดยใช้ SMK-501specific gravity kit (เป็นอุปกรณ์เสริม)
  15. มีซอฟท์แวร์สำหรับการวัดค่าความถ่วงจำเพาะอยู่ในเครื่องชั่ง
  16. สามารถตรวจสอบความถูกต้องของน้ำหนัก โดยการแสดงสัญลักษณ์ GO (pass), HI (over) หรือ LO (under) ที่หน้าจอเครื่อง
  17. ตัวเครื่องมีฟังค์ชั่น WindowsDirect โดยผู้ใช้สามารถโอนถ่ายข้อมูลลงบนคอมพิวเตอร์ได้โดยตรงเมื่อมีการเชื่อมต่อผ่านสาย RS232C (D-sub 9P plug), USB device (Type B) (สายเชื่อมต่อเป็นอุปกรณ์เสริม)
  18. ระบบการปรับน้ำหนักโดยใช้ลูกตุ้มน้ำหนักภายในเครื่อง (Built-in Calibration Weight)และสามารถใช้ตุ้มน้ำหนักมาตรฐานภายนอก สำหรับการปรับค่ามาตรฐานของเครื่องได้ (Calibration with External Weight)
  19. มีฟังค์ชั่น PSC (Perfect Self Calibration) ที่ช่วยในการคาลิเบรทค่ามาตรฐานในกรณีที่อุณหภูมิของตัวอย่างที่วัดมีค่าที่สูงหรือต่ำกว่าอุณหภูมิห้อง เพื่อให้อ่านค่าได้อย่างถูกต้องและแม่นยำ
  20. มีระบบ Clock-Cal ที่ผู้ใช้สามารถตั้งเวลาได้วันละ 3 รอบ ให้เครื่องทำการปรับค่ามาตรฐานโดยอัตโนมัติ
  21. สามารถเชื่อมต่อกับเครื่องพิมพ์ผล (รุ่น EP-100 หรือ EP-110 ซึ่งเป็นอุปกรณ์เสริม) เพื่อพิมพ์ผลค่าน้ำหนักหรือผลในการปรับค่ามาตรฐานได้โดยอัตโนมัติ ตามมาตรฐาน GLP/GMP/ISO9000
  22. ขนาดของเครื่องชั่ง (กว้าง) 213 มม. x (ลึก) 356 มม. x (สูง) 338 มม.
  23. ตัวเครื่องน้ำหนัก 6.2 kg.
  24. สามารถใช้งานได้ที่อุณหภูมิ 5 - 40°C
  25. ใช้ไฟฟ้า 220 โวลท์ 50 ไซเคิล โดยใช้ Adapter
  26. เป็นผลิตภัณฑ์ที่ผลิตจากโรงงานที่ได้รับการรับรองมาตรฐาน ISO 9001
  27. ผลิตภัณฑ์ประเทศญี่ปุ่น

 

AT-R Series - Features

1. Easy Settings Enable Responsiveness and Stability to be Freely Changed

  

Responsiveness becomes very important when weighing fixed amounts of powders and liquids. On the other hand, stability is required when weighing substances in environments subject to drafts or vibrations. The AT-R balances are equipped with a 5-stage indicator. It is easy to switch between a response focus (R) and a stability focus (S) during measurements.

 

 

2. Equipped with Two Interfaces: USB and RS232C

Equipped with Two Interfaces: USB and RS232C

The balances are equipped as standard with two convenient interfaces for connection with a computer or PLC (programmable logic controller). Human error can be prevented by direct transfer of weight values to the computer.

● The balances have been shown to operate with the following PLCs from major companies.

  • Mitsubishi Electric Q Series
  • OMRON CJ2 Series
  • Keyence KV-8000
  • IDEC FC6A Series

    3. Addition of an Ionizer Increases Measurement Reliability

The optional STABLO™-AP ionizer (static remover) quickly removes static from samples and containers, without creating a draft. This prevents reproducibility errors and fluctuations in measurement values due to static electricity. The static elimination can be enhanced by placing flasks in the AP Holder (sold separately).

 
Visitors: 59,127